DN55 XT
Category: Night Vision Attachments
Night vision attachment
(clip-on) for daylight optics
The clamp adapters type‑A with inner thread M52x0,75mm allow the use of night vision attachment (clip-on) devices with outer thread M52x0,75mm to binoculars, spotting scopes, photo cameras and other daylight devices with different diameters of the lens housing. The millimeter specification (mm) in the article refers to the diameter of the lens housing, the diameter of the lens housing may vary from the specified adapter diameter maximum to 0,5mm. The attachment depth of the adapter is 35mm.
Disclaimer: The mounting of night vision devices onto the aiming devices is prohibited in the Federal Republic of Germany.
Price: from 2.199,00 €
Prices incl. VAT plus shipping costs
Do you have questions about this item or would you like to order it?
Features:
- Wide observation range, due to well developed optical system. The value of observation range in meter is strongly dependant on the light transmission of the optical system, atmospheric density, contrast between the object viewed and its background, as well as the size of the object
- Maintains all characteristics of a daylight optics by the use of very high quality optical elements
- Suitable for all daylight lenses with an inner thread of M49x0,75mm
- With Alpha Photonics® clamp adapters suitable for all types of lenses from 30mm up to 80mm lens diameter
- Option of mounting on all common daytime devices, for a various field of use
- Provides the opportunity for high-quality photo- and video recording (M49x0,75mm outside thread at the ocular of the device)
- Wide range of suitable M49x0,75mm Step-Up and Step-Down thread adapters (filter adapters), and coupling rings in the photo stores
- Inner lens-adjustment/fine-focusing from 10m up to ∞
- Manual brightness control (EGAC)
- Bright source protection (BSP)
- Optional: With fluorescent operating elements available
- Mounting possibility for autonomous IR-illuminators
- Water protected
- Low energy consumption
- Lightweight
- Shock resistant
Compatible with other equipment:
- Alpha Photonics® clamp adapters
- Rubber eyecup «NVD_RE.7»
- Alpha Photonics® magnification boosters
- Bridge adapter «IR_NVM.1», «IR_NVM.2» and «IR_NVM.3» for autonomous IR-illuminators
- Autonomous IR-illuminators
Included in the delivery:
- Lens cap
- Transporting softcase
- Cleaning cloth
- 1 batteriy (CR123)
General technical data:
Magnification | 1x |
Viewing angle | 19° |
Effective lens diameter | 53 mm |
Focal length | 80 mm |
Effective ayepiece diameter | 22 mm |
Image intensifier tube | Gen. II+ CommGrade type S950 EGAC (minimum 45 lp/mm) |
Energy source | one CR123 (3V) battery |
Continuous operation time, h | minimum 54 |
Operation temperature | from − 20°C up to + 50°C |
Humidity | IPX5 nach IEC 60529 |
Dimensions, mm | 165x65x63 |
Weight | 600g |
Magnification on the daylight optics
|
|
Maximum magnification | 1x − 12x |
Optimal magnification | 2x − 6x |
This device we are offering in combination with the following image intensifier tubes:
• Gen. II+ Commercial Grade Typ S950 EGAC
• Gen. II+ Commercial Grade Typ S950 EGAC as a BLACK/WHITE model
All regular articles have a 14 days right of return and 5 years guarantee, with a service address in the Germany! Except Commercial Grade models, these devices are covered by the general 2 years guarantee.
Product safety
Manufacturer:
Optinova Solutions UG
Lahnblick 1,
35606 Solms-Oberbiel,
Germany
E‑Mail: info.optinova@mailbox.org
Responsible economic operator in the EU:
Optinova Solutions UG
Lahnblick 1,
35606 Solms-Oberbiel,
Germany
E‑Mail: info.optinova@mailbox.org